EDUP EP-AB003 2.4Ghz 8W 802.11n Wireless Wifi Signal Booster Repeater Broadband Amplifiers for Wireless Router wireless adapter

Note:

• Your device must be SMA antenna detachable Connector when used it , for example SMA detachable antenna router
• Please comfirm that you device output power range is between 3dBm and 20dBm,only that the wifi signal booster could work well .

Features:

• Low-noise receive gain
• Signal activity LED indicates
• High Gain, High Value, High Performance
• Maximum output power of 8000mW by the Booster
• Plug-and-play, Easy installation, no driver needed
• Ideal for increase the 2400-2500Mhz frequency devices
• Increase the effective range and coverage area of your Wi-Fi network
• Simply attach the booster in between the standard antenna on a wireless router or wireless access point and watch your range grow
• The amplified wireless signal may even penetrate complex environments with many walls and obstacles
• Ideal for use with 2.4GHz Wireless LANs, Support 802.11b, 802.11g, 802.11n (2.4Ghz mode only)

Specification:

• Operation Range: 2400-2500 MHz.
• Operation Mode: Bi-directional, half-duplex, Auto-Switching via carrier sensing.
• Frequency Response: ? 1dB over operation range.
• Input Power: 3dBm (Min.)-20dBm (Max.).
• Output Power: 8000mW/39dBm nominal 
• Connector: SMA Receptacle, 50 ohm.
• Transmit Gain: 16-18dBm nominal.
• Receiver Gain: 10-12dBm.
• Receive Noise Figure: 3.0dBm nominal.
• Operating Temperature: -40 to 70 degree.
• Operating Humidity: Up to 95% relative humidity.
• Material: Cast Aluminum
• INPUT?100-240V 0.3A  50/60HZ
• OUTPUT:12V  1.5A