Happymodel Mobula7 75mm Crazybee F3 Pro FPV Racing Drone Quadcopter

$178.00$200.00

Out of stock

Brand Name:Happymodel;Aerial Photography:Yes;Material:Metal;Material:Plastic;Package Includes:Batteries;Package Includes:Operating Instructions;Remote Control:Yes;State of Assembly:Ready-to-Go;Remote Distance:as the instruction;Dimensions:98mm*98mm*36mm;Power Source:Electric;Charging Voltage:as the instruction;Charging Time:as the instruction;Warranty:as the instruction;Warning:as the instruction;Plugs Type:as the instruction;Motor:Brushless Motor;Controller Battery:as the instruction;Control Channels:4 Channels;Action Time:as the instruction;Controller Mode:MODE1;Controller Mode:MODE2;Age Range:> 14 years old;Model Number:Happymodel Mobula7 Drone;Barcode:No;Features:Remote Control;Type:Helicopter;100002145:200002556,200002556,200002556;6:366243,366243,366243;Wheelbase:75mm;Weight:25.9g (without battery);

Clear

Notice: Now the frame of this set upgrade to V2, V2 frame color has black and white, will ship randomly.if you have a color request of the frame, pls contact freely before plac ethe order.

there is 4 pairs red propeller and 4 pairs black color, installed black or red propeller in randomly on the drone. For the drone send with at least 2 pcs batteries, Orinoco standard shipping doesn’t allow the item with an outside battery, we will change the shipping method. If you mind it, pls contact us freely, thanks!

Specification: 
Model: Mobula7
Item Name: 75mm Wheelbase 2S Brushless Whoop FPV Racing Drone

Version: Basic Version / Standard Version ( Optional)
– The difference between them is the package charger.
   Basic Version: USB Charger
   Standard Version: 6-way Charger

Receiver ( Optional): Compatible Frsky NON-EU Receiver
                                      Compatible Frsky EU-LBT   Receiver  ( XM+ Receiver)
                                      Compatible Flysky AFHDS/ AFHDS-2A Receiver
                                      Compatible DSM2/DSMX Receiver

 

Crazybee F3 Pro Flight Controller Item Name: Crazybee F3 Pro FC
MCU: STM32F303CCT6 (72MHZ, 256K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 1-2S battery input (DC 3.5-8.7V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
Built-in Receiver ( Different version having different receiver)
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 28A
Current meter scale set to 1175
Built-in 5V 1A BEC with LC filter

Built-in voltage detection
BLHELI_S pass-through Ready
Heading LED Ready

Firmware
(Frsky version) CRAZYBEEF3 PRO FR Firmware target: CrazybeeF3FR
(Flysky version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
(DSM2/DSMX version) CRAZYBEEF3 PRO Firmware target: CrazybeeF3DX
(Frsky EU-LBT version) CRAZYBEEF3 PRO FS Firmware target: CrazybeeF3FS
 

Onboard 5A 4 In 1 ESC

Power supply: 1-2S LiPo/LiPo HV (3.5v/8.7v)
MCU upgraded to EFM8BB21
Current: 5A continuous peak 6A (3 seconds)
Support BLHeliSuite programmable
Factory firmware: S_H_50_REV16_7
Default protocol: DSHOT600

Onboard Frsky NON-EU receiver Version SPI BUS receiver
Frsky D8/D16 switchable
Compatible Non-EU transmitter both D8 and D16 mode

Channels: 8ch or 16ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard Frsky EU-LBT Version
(External XM+ receiver)
 

Operating Voltage Range: 3.7~10V
Operating Current: 30mA @5V
Operating Range: Full range
With RSSI output onboard: Analog 0~3.3V
Firmware Upgradeable, Default firmware EU-LBT with RSSI

Onboard Flysky receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
Onboard DSM2 / DSMX receiver version Serial bus receiver
Protocol: DSM2/DSMX compatible
Channels:6-9 (Depend on your radio)
No ground interference ( Transmitter and receiver 1 m from the ground): 300m
 
SE0802 16000KV Motor Model: SE0802
KV: 16000KV
Configu-ration: 9N12P

Stator Diamter: 8mm
Stator Length: 2mm
Shaft Diameter: ?1.0
Motor Dimension (Dia.*Len) : ?10.5*14.5mm
Weight: 1.8g

Support 1-2S Lipo

 

No.of Cells: 1S Lipo

Propeller 40mm 3-blade Propeller ( 4 CW + 4 CCW)
 
5.8G VTX AIO Camera
 
5.8G 40CH 25mW VTX
Output power: 25mw
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)

700TVL FOV120 Camera
Camera resolution: 700TVL
Field of view: 120?
Video Format: NTSC
Antenna: RG178 antenna
Frequency: 5.8GHz 5bands 40 channels
With Raceband
Smart audio ready(Frsky EU-LBT and DSMX version not compatible)
Size: 13.9″12.0mm ( L*W )
Weight: 3g
 

Lipo Battery Capacity:250mAh
Voltage:3.8v
Continuous Discharge Rate: 30C
Instantaneous discharge rate: 60C
Size: 55mmx12mmx7mm
Weight: 6.5g
Connector: PH2.0
Notes: Need 2pcs batteries for Series circuit
 

Features:
– New Crazybee F3 PRO Flight controller 1-2s Lipo compatible
– 2S whoop more powerful and more flight time
– Betaflight support, multi flight mode: ACRO/AIR/ANGLE
– New 0802 Powerful and High-efficiency Brushless motor and Smooth ESC
– Smart audio ready, change VTX bands, channels via OSD
  DSM2/DSMX and Frsky EU-LBT version are Serial-based receivers, so Smart audio are not compatible.
– Adjust the settings and the PID of the flight controller via OSD
– Frsky Non-EU version support NON-EU Frsky transmitter D8/D16 compatible
– Flysky version support both AFHDS and AFHDS-2A protocol transmitter
– DSM2/DSMX version support DSM2 and DSMX compatible Spektrum transmitter
– Frsky EU-LBT version support Frsky EU-LBT firmware transmitter
– Full telemetry function ready
– Headlights ready
– Camera angle adjustable
– Real Bind and Fly version
– Buzzer Ready

Package Included:
Basic Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x USB Lipo/LIHV Charger
1x Fixing Mount for Lipo Battery
1x Propeller Disassemble Tool
1x Screwdriver

Standard Version
1x Mobula7 75mm FPV Drone
4x 40mm 3-Blade Propellers ( 4 CW & 4 CCW)
4x 3.8v 250mah 30C/60C Lipo battery
1x 1S06 6 Way Lipo/LIHV charger
1x Propeller Disassemble Tool
1x Fixing Mount for Lipo Battery

Additional information

Weight 0.4 kg
Warning

astheinstruction

color

DSM- 2 DSM-X Basic, DSM-2 DSM-X Standard, Flysky Basic, Flysky Standard, Frsky EU-LBT Basic, Frsky EU-LBTStandard, Frsky Non-EU Basic, Frsky Non-EUStandard

Wheelbase

75mm

100002145

200002556,200002556,200002556

Features

RemoteControl

Warranty

astheinstruction

Motor

BrushlessMotor

Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

See It Styled On Instagram

    Instagram did not return any images.

Main Menu